Operation • The operator should be positioned just behind the product handle for best product use • To elevate the table, the operator should push on the foot pedal and pump regularly to achieve desired platform height • To lower the table, gently squeeze the release lever and stop when desired platform height is achieved •...
Page 3
CAUTION • Read the instruction manual carefully prior to operating DO NOT over load beyond rated capacity • ALWAYS operate truck on ground level • • Secure the balance of the load BEFORE moving DO NOT fully open the release lever when the trolley is loaded •...
Page 4
DO NOT use for climbing stairs when loaded. • DO NOT place body parts underneath lowering table. • ALWAYS try to operate on even ground. • • Try to slide loads onto table rather than lifting. • Use common sense and the correct lift trolleys to reduce load- handling injuries.
Trouble Shooting Trouble Cause Shooting Table does not 1. There is no oil Replenish the raise in the reservoir reservoir 2. Lowering Valve (16) or Steel Ball (30) or Spring (31) is not seating Table does not Lowering Valve (16) Flush the Lowering remain elevated or Steel Ball (30) is...