Download Print this page

Linnenberg UNISONO Owner's Manual

Download this manual

Owner's Manual

UNISONO

Page 1 Owner’s Manual UNISONO...
Page 3 Front panel There are no controls or optical indicators on the front panel. (Figure 1) Connections - rear IEC appliance inlet fixed cable outlet and hard wired for DC output mains switch voltage (Figure 2)
Page 4 Never plug an 115V version in a 230V mains socket or serious damage will occur. Before ultimately firing up your UNISONO, you must first establish the connection to MAESTRO, VIVACE or any other future product using the DC performance link. The multi pin medical grade connector with lock nut must be secured first in place.
Page 5 Mains voltage selection / fuse replacement The following work should only be carried out by a qualified technician in accordance to highest electrical safety standards. Risk of electric shock. Replacing the fuse The fuse must be replaced by a 0.63AT type (5x20mm). Never attempt to short the fuse holder.
Page 6 The serial number is an essential part of our conformity declaration and therefore of the approval for operation of the UNISONO. The serial numbers on the unit and in manual, must not be removed or modified, and must correspond.
Page 7: Warranty Certificate
In the event that LINNENBERG ELEKTRONIK receives, from an original purchaser and within the warranty coverage period, written notice of defects in materials or workmanship, LINNENBERG ELEKTRONIK will replace the product, repair the product, or refund the purchase price at its option.