Advertisement
8. Configure the alarm and control system access codes
The CLE 8000 TYXAL+ uses 2 types of access code:
Alarm access code:
• To create, modify or delete an access code
(installer or user),refer to the system installation guide.
Control system access code:
• Upon activation, the user code is
• To change the default access code or create
a new access code:
Ê Enter your access code (1234 by default)
Ë On the keypad, press the
The red LED (
Ì Enter the new access code (4 digits), then press
The green LED comes on for 3 seconds, then red.
To confirm and exit the mode, press the
seconds.
You can create up to 9 different control system access codes.
Beyond this input is refused and the keypad emits aseries of
beeps.
button for 5 seconds.
button) will come on.
- 15 -
,
.
button, for 5
EN
Advertisement
