Table of contents Technical Data Installation and connections Operation Menus Basic Mode (Mod1) Programming Cancellations Advanced Mode (Mod2) F.1 Programming F.2 Cancellations F.3 Time configuration F.4 Relay configuration Alarm function Mensajes Notes Errors Important safety instructions Use of the equipment Regulatory Data EU Declaration of conformity jcmtechnologies...
Installation and connections Attach the rear part of the housing to the wall using the plugs and screws supplied. Pass the cables through the bottom of the unit. Connect the power cables to the terminals marked in the mother board, as indicated. Fix the unit front to the rear part using the screws supplied.
Advanced Mode (Mod2) Allows the complete management of the unit: programming (F.1), cancellations (F.2), time configuration (F.3) and relay con- figuration (F.4). Function is changed using . To confirm each option, press the C key. Events monitoring (only visible using the Assistant). F.1 Programming Standard programming (Mr_P) (default option, multi-channel mode) The screen displays the first empty memory position in which we can program a code (M001).
F.3 Time configuration Allows the unit’s date and time to be configured, enabling the correct management of events. The event memory stores the date and time of the event, the type of event, the code, the number and the model of the device. The events can be shown using the Assistant programming tool.
The manufacturer reserves the right to change the device specifications without warning. Regulatory Data EU Declaration of conformity The manufacturer JCM TECHNOLOGIES, S.A. declares that the product ACCESS 500 complies with the relevant fun- damental requirements of the RED Directive 2014/53/EU and of the RoHS Directive 2011/65/EU. See website www.jcm-tech.com/declarations/...