Oliveri Dublin DU1650 Installation Instructions

WARRANTY
Oliveri Inset and Island Baths carry the following domestic warranty:
15 years replacement product / 1 year labour
Visit oliveri.com.au for full details.
Please note: It is the responsibility of you and/or the installer
to ensure that prior to installation:
• the Product is not damaged; and
• the Product has all its components.
Following installation of your Product, it is your responsibility
to ensure all required maintenance is performed. If the product
is incorrect or has a genuine manufacturing fault, it must NOT be
installed. The Product can be returned, with proof of purchase, to
the location it was purchased.
If you are a consumer as defined under the Australian Consumer
Law, our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
The Oliveri Warranty is in addition to all your rights and remedies
under the Australian Consumer Law.
The Oliveri Warranty only applies to you if you are the original
purchaser of the Product. It is not transferable.
Subject to the terms contained in the full Oliveri Warranty
document available at oliveri.com.au/service-and-warranty-au,
where a genuine manufacturing defect arises in your Oliveri Inset
or Island Bath during the course of normal domestic or commercial
use within the warranty period, Oliveri will, at its election repair the
defect or replace the Product.
Your Oliveri Warranty does not cover scratching or any defect or
damage caused, or partly caused by, or arising through: fair wear
and tear (e.g. surface deterioration or scratching from cleaning etc.);
incorrect storage or handling of the Oliveri Inset or Island Bath;
failure to correctly install, use or maintain the Product or to follow
any instructions or guidelines for installation, use or maintenance
of the Oliveri Inset or Island Bath; faulty design of a system in
which the Product is used; the use of the Oliveri Inset or Island Bath
other than for any application specified on a quote or order form,
price book or catalogue issued by Oliveri; the continued use of the
Product after any defect becomes apparent or would have become
apparent to a reasonably prudent operator or user; or any accident
or act of God.
This Warranty will be void if certain events arise including:
• You are unable to provide proof of purchase or equivalent
documentation from an authorised retailer of your Oliveri Inset or
Island Bath;
• If:
• your Oliveri Inset or Island Bath is not installed by a licensed
plumber or qualified tradesperson, (as appropriate);
• your Oliveri Inset & Island Bath is not installed in
accordance with the recommended design guidelines or
installation instructions; and
• unauthorised modifications are made to your Oliveri Inset
or Island Bath.
Full details of exclusions and limitations are set out in the full
Oliveri Warranty document available at: oliveri.com.au/service-and-
warranty-au
To the fullest extent permitted by law and subject to and without
limiting your consumer rights under the Australian Consumer
Law, Oliveri expressly limits its liability under this Oliveri Warranty
and under any other statutory guarantee imposed at law to, at its
option:
• the replacement or repair of the Oliveri Inset or Island Bath;
• the supply of an equivalent Oliveri Inset or Island Bath; or
• the payment of the cost of the Oliveri Inset or Island Bath or of
repairing the Product or of acquiring an equivalent Oliveri Inset or
Island Bath.
To the fullest extent permitted by law, Oliveri expressly excludes:
• all liability for damage or injury to any person;
• damage to any Property;
• loss of profit, loss of revenue, loss of use, loss of business,
loss of opportunity, loss of goodwill, loss of contracts, loss of
production, business interruption or any kind of indirect, special
or consequential loss or damage arising in connection with the
defective product; and
• all conditions, warranties and undertakings in relation to the
Oliveri Inset or Island Bath except as set out in the full
Oliveri Warranty document available at oliveri.com.au/service-
and-warranty-au
SERVICE / WARRANTY CLAIMS
To make a warranty claim, please contact Oliveri by phone on:
08 8348 6444 or by email: warranty@oliveri.com.au. You must
bear your own costs incurred in making a warranty claim.
No specific claim form is required however the following
documentation must be supplied as part of your claim:
• proof of purchase;
• handover documentation (for new homes);
• your contact details, including the address of the installed Product;
• photo/s of your Product and the defect in question; and
• details of the warranty claim including date of installation,
installer details, and description of the product fault.
Oliveri Solutions Pty Ltd
ABN 12 007 551 886
51 Naweena Rd, Regency Park SA 5010
P 08 8348 6444 E sales@oliveri.com.au
Dublin
Inset Bath With Tile Bead
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESPERSON
Congratulations on purchasing an Oliveri bath. It represents
the very best of Australian design ideas combined with
well proven construction techniques.
manufactured to stringent Australian Standards, so you
can be assured of safety and reliability.
The Dublins' elegant, simple lines create the perfect
balance of form and function.
premium sanitary grade acrylic, the bath is durable and
easy to clean. Additionally this bath base has been
reinforced with a resin and fiberglass coating for superior
sturdiness and durability.
Correct and proper use of your bath will ensure its
long-lasting life. Please consult the Caring for Your Bath
section of this manual for advice on cleaning and
regular maintenance.
Features
• 15 year warranty (see Oliveri.com.au for details)
• Manufactured to AS/NZ Standard 2023/1995
• Steel rod reinforced rim
• Double reinforced bath base
• End waste position*
*Plug and waste not included
Page 4 of 4
Installation Instructions
STOP AND READ CAREFULLY
Oliveri products are
PRE-INSTALLATION CHECKS
Inspect the acrylic surface of the bath for
damage. Damage found after installation
Manufactured from
is not covered by the manufacturer's
warranty conditions. ANY CLAIMS FOR
DAMAGE WILL NOT BE ACCEPTED AFTER
INSTALLATION.
Protect your bath before and during
installation. Scratches, cracks or other
surface damage sustained during or after
the installation are NOT COVERED BY
WARRANTY.
Installation must only be carried out by a
QUALIFIED TRADESMAN and in accordance
with building regulations and any local
authority requirements.
REMOVE PLASTIC FILM prior to installation.
We recommend that 'pre-framing' work be
carried out when the product is on-site.
Do not install bath on foam.
TF34a - Dublin Inset Bath Installation Instructions / Page 1 of 4