LINOVISION IOT-R32 Quick Start Manual page 9

IOT-R32 Quick Start Guide
4. Log in the Web GUI of Router
4.1 PC Configuration
Please connect PC to LAN port of IOT-R32 router. PC can obtain an IP address, or you can configure
a static IP address manually. The following steps are based on Windows 10 operating system for
your reference.
(Note: As remote access is disabled by default, you can't access to the router's Web GUI if you connect
PC to WAN port of the router. But it will function properly if you enable it on Web GUI.
② Click "Control Panel" to open it, and then click
① Click "Search Box" to search "Control Panel" on the
Windows 10 taskbar. "View network status and tasks".
③ Click "Ethernet" (May have different names). ④ Click "Properties".
www.linovision.com 9