Prem-I-Air EH0516 Manual page 2

IMPORTANT
Installer and Users please note:
These instructions should be read carefully and left with the
user of the product for future reference.
ASSEMBLY.
Hold the fan by the head assembly and remove the pole nut.
Place the head assembly in the base, and press firmly into
position. The replace the pole nut.
Unscrew the plastic nut from the motor housing. Locate the
rear guard on the motor housing - the two holes in the guard
align with the two round pegs on the motor housing. Push the
guard firmly into place and secure with the plastic nut.
Insert the motor shaft through the blades, aligning the pin on
the motor shaft with the slot on the back of the blades.
Secure the blades in place with the spinner. Rotate anti-
clockwise to tighten - it has a left-handed thread.
Check that the blades are free to rotate.
Attach the front guard to the rear guard using the clips built
into the front guard.
Using a screwdriver, secure the two parts of the guard
together with the screw and nut provided.
Page 2