Table of Contents
Advertisement
Handset
1. Check handset LED before each
use;
2. If the handset indicator lights,
please charge it immediately;
3. Please ensure that the bath water
temperature is comfortable;
4. The UP button on the handset will
cause the bath lift to rise, the
DOWN button will cause the bath
lift to lower, the STOP button will
cause the bath lift to stop motion;
5. The buttons on the handset are
textured to assist persons with
visual impairments;
6. Some bath lifts require that the
user push and hold the handset
buttons for operation;
7. The back rest can recline to 45
degrees when the bath lift is fully
lowered;
8. For the bath lift to rise, the back
rest must be at 90 degrees to
ensure safety.
To use:
Assemble back rest to seat:
1. Place the back rest on the back of
the seat;
2.
With one hand hold the back rest
at the grip and with your other
hand tilt the back rest until it rests
against the base plate.
3.
Insert the integrated drive unit at
the bottom of the backrest into the
bearing block of the seat.
Sit on and use:
1. Use the handset to move the bath
lift all the way up so the back rest is
at 5 degrees and the side flaps are
over the sides of the bathtub;
2. Sit on the side plate with your back
towards the opposite side;
3. While in that position slide into the
center of the seat;
4. Rotate your upper torso and put
your feet in the tub;
5. Use the handset to lower the bath
lift into the tub, while lowering
ensure your feet are ad other
objects are not obstructing the
motion of the bath lift;
6. Use the handset down button to
adjust the back rest to the desired
resting angle up to 45 degrees.
7. When bath is complete, use the
handset to raise the back rest and
then the bath lift.
8. Place feet outside tub.
9. Rotate upper torso and slide over
to the side flap.
Always use handset during regular
operation
8
Advertisement
Table of Contents
