Related Manuals for Teamson HF28201AA
Summary of Contents for Teamson HF28201AA
- Page 1 Peaktop TIME SAVER! 3D Interactive Instruction 28" Textilene Base Mental top Propane Firepit HF28201AA-UK www.teamson.com...
- Page 2 ** Got questions? Please have your product code (on the first page of this instruction, e.g. HF28201AA-UK) and the order number ready, give us a call or email us through our customer care support! We are always ready to assist you!
- Page 3 Serving you well gives us great joy! +1(800)935-3959 Mon - Fri 10:00am ~ 2:00pm EST support@teamson.com +44(0)1952-916-050 Mon - Thu 9:00am ~ 5:00pm GMT Friday 9:00am ~ 4:00pm GMT support@teamson.co.uk 深圳办公室: +86(0755)8885-3558.分机号108 Mon - Sat 9:00am ~ 5:00pm GMT+8 sales_ec@teamson.com 台北辦公室:...
- Page 4 SAFETY INFORMATION WARNING DANGER Do not store or use gasoline or other FIRE OR EXPLOSION HAZARD flammable vapors and liquids fuel in If you smell gas: the vicinity of this or any other appliance. Turn off gas supply. ・ An LPG-cylinder which has not been Extinguish any open flame.
- Page 5 SAFETY INFORMATION Product Name Gas Fire pit HF28201AA Model Gas Type Butane at LPG gas LPG gas mixture LPG gas mixture (28~30)mbar/ mixture Propane at 37mbar Gas Category I 3+ （ 28-30/37） I 3B/P(30) I 3B/P(37) I 3B/P(50) Heat input (Hs) 13 kW(946.4g/h)
- Page 6 SAFETY INFORMATION Before you assemble or operate this unit, please carefully read this entire manual. Failure to do or follow may result in a fire, explosion, injury or death. WARNING GENERAL WARNINGS • FOR OUTDOOR USE ONLY--DO NOT SIT OR STAND ON TABLE Warning -For your safety •...
- Page 7 SAFETY INFORMATION • This outdoor firepit must NOT to be operated by children. Young children should be closely supervised when in the vicinity of this outdoor firepit. • This outdoor firepit should not to be installed or used in or on a recreation vehicles and/or boats.•...
- Page 8 SAFETY INFORMATION • Prior to each gas firepit operation, check the hose for evidence of excessive abrasion or wear by looking through the visual check hole. If the hose is damaged, cut or cracked, it must be replaced before using the gas firepit. The hose assembly can only be replaced by a hose assembly specified by the manufacturer.
- Page 9 SAFETY INFORMATION • Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of dust cap on the LP gas tank valve outlet that is provided with the LP gas tank valve. Other types of caps or plugs may result in leakage of propane.
- Page 10 SAFETY INFORMATION In the event of gas leakage, the appliance shall not be used or if alight, the gas supply shall be shut-off and the appliance shall be investigated and rectified before it is used again. Tighten any leaking fittings, then turn on gas supply and recheck.If necessary, substitute gasket (according to EN 549 Class B2) Maintenance and Cleaning To enjoy years of outstanding performance from your appliance, regular services of the...
- Page 11 Product Parts Table Leg Table Leg Panel Table Leg Table Leg Tank Holder/Base Panel Door Panel Contorl Knob Table Lid Fire Table with Burner Lava Rocks PVC Cover Screw(M6*12MM) 2BOX(3KGS） 5PCS Screwdriver Screw(M6*20MM) M6 Washer 16PCS 20PCS WARNING: 1. Do not let any sharp objects touch or rub the surface of the product. 2.
-
Page 12: Assembly Instruction
ASSEMBLY INSTRUCTION Do not lock the screws until the assembly is complete. Step1.Connect the tank holder/base (I) With table Lets(A/B/C/D) by 4pcs screws (R)and 4pcs M6 washers(Q). Step2. Connect panel (E,F,G)with table legs(A,B,C,D) by 12pcs screws (R) and 12pcs M6 washers(Q). Questions? Scan Here... - Page 13 ASSEMBLY INSTRUCTION Step3.Hang the bottom (H) of the door plate on the round bracket.Top with 1PC screw(O)lock. Step4.Attach the assembled base to the bottom of top using 4pcs of screws (O),and 4pcs M6 washers(Q), make sure the panel (L) faces the valve stem. Tighten all screws. Questions? Scan Here...
- Page 14 ASSEMBLY INSTRUCTION 5.Put the table lid. Questions? Scan Here...
- Page 15 ASSEMBLY INSTRUCTION Place propane gas tank (not included) into the metal stand (I). Make sure the gas tank sits on the metal stand (I) completely. Regulator Step1:Turn the knob to the position shown in the figure(1). Step2:Press the regulator down in the direction Knob Button shown in the figure(1) while holding down the...
-
Page 16: Maintenance
OPERATION OPERATION 1.Make sure the control knob is in the "OFF" position. 2.Open the door and slowly open the valve on the propane gas tank by turning the knob counterclockwise. 3.Close the door on the body. 4.Push the ignition control knob in fully and rotate about 1/4 turn counterclockwise until a click is heard, it may take several attemps to light the burner. -
Page 17: Troubleshooting
Electrode wire is loose or Reconnect wire to the igniter box located disconnected inside the table behind the igniter box Contact Teamson design corp. for a Electrode wire is shorting between replacement part valve and igniter pin Check that the gas tank isn’t empty No gas flow Regulator isn’t connected securely to... -
Page 18: Warranty
• Modification of the unit and/or components including the gas valve assembly. • Use of any component part not manufactured or approved by Teamson design corp. • Use and installation other than what is listed in this manual.