Related Manuals for Teamson Peaktop
Summary of Contents for Teamson Peaktop
- Page 1 Peaktop TIME SAVER! 30" Rattan Base Tempered 3D Interactive Instruction Glass Top Propane Firepit HF30200AA-UK www.teamson.com...
- Page 2 √ ** Got questions? Please have your product code (on the first page of this instruction, e.g. HF30200AA-UK) and the order number ready, give us a call or email us through our customer care support! We are always ready to assist you!
- Page 3 Serving you well gives us great joy! +1(800)935-3959 Mon - Fri 10:00am ~ 2:00pm EST support@teamson.com +44(0)1952-916-050 Mon - Thu 9:00am ~ 5:00pm GMT Friday 9:00am ~ 4:00pm GMT support@teamson.co.uk 深圳办公室: +86(0755)8885-3558.分机号108 Mon - Sat 9:00am ~ 5:00pm GMT+8 sales_ec@teamson.com 台北辦公室:...
- Page 4 SAFETY INFORMATION WARNING DANGER Do not store or use gasoline or other FIRE OR EXPLOSION HAZARD flammable vapors and liquids fuel in If you smell gas: the vicinity of this or any other appliance. Turn off gas supply. ・ An LPG-cylinder which has not been Extinguish any open flame.
- Page 5 SAFETY INFORMATION Product Name Gas Fire pit HF30200AA Model Gas Type Butane at LPG gas LPG gas mixture LPG gas mixture (28~30)mbar/ mixture Propane at 37mbar I 3+ （ 28-30/37） Gas Category I 3B/P(30) I 3B/P(37) I 3B/P(50) Heat input (Hs) 13 kW(946.4g/h) 13 kW(946.4g/h) 13 kW(946.4g/h)
- Page 6 SAFETY INFORMATION Before you assemble or operate this unit, please carefully read this entire manual. Failure to do or follow may result in a fire, explosion, injury or death. WARNING GENERAL WARNINGS • FOR OUTDOOR USE ONLY--DO NOT SIT OR STAND ON TABLE Warning -For your safety •...
- Page 7 SAFETY INFORMATION • This outdoor firepit must NOT to be operated by children. Young children should be closely supervised when in the vicinity of this outdoor firepit. • This outdoor firepit should not to be installed or used in or on a recreation vehicles and/or boats.•...
- Page 8 SAFETY INFORMATION • Prior to each gas firepit operation, check the hose for evidence of excessive abrasion or wear by looking through the visual check hole. If the hose is damaged, cut or cracked, it must be replaced before using the gas firepit. The hose assembly can only be replaced by a hose assembly specified by the manufacturer.
- Page 9 SAFETY INFORMATION • Place dust cap on valve outlet whenever the LP gas tank is not in use. Only install the type of dust cap on the LP gas tank valve outlet that is provided with the LP gas tank valve. Other types of caps or plugs may result in leakage of propane.
- Page 10 SAFETY INFORMATION In the event of gas leakage, the appliance shall not be used or if alight, the gas supply shall be shut-off and the appliance shall be investigated and rectified before it is used again. Tighten any leaking fittings, then turn on gas supply and recheck.If necessary, substitute gasket (according to EN 549 Class B2) Maintenance and Cleaning To enjoy years of outstanding performance from your appliance, regular services of the...
- Page 11 Product Parts Door Back Panel Front Panel Fire Table with Burner Lava Rocks Metal Stand PVC Cover Right Panel Contorl Knob 1BOX(3KGS) Washer Screw(M6*30MM) Screw(M6*16MM) 12PCS 8PCS 4PCS WARNING: 1. Do not let any sharp objects touch or rub the surface of the product. Questions? 2.
-
Page 12: Assembly Instruction
ASSEMBLY INSTRUCTION Do not lock the screws until the assembly is complete. Step1.Check that the control knob (J) for the gas supply system is turned to the 'OFF' position before starting any assembly. Step2. Attach back panel (E), right panel (F) and front panel (D) together using 4 pcs M6 x 30 screws (L) and 4 pcs washers (M) . - Page 13 ASSEMBLY INSTRUCTION Step3.Attach the metal stand (G) to the woven base using 4 pcs M6 x 30 screws (L) and 4 pcs washers (M) . Step4.Attach woven base to the bottom part of the table top (B) using 4 pcs M6 x 16 screws (K) and 4 pcs washers (M). Questions? Scan Here...
- Page 14 ASSEMBLY INSTRUCTION WARNING The hose must be fixed in the bracket always, otherwise may get touch with hot surface to melt and cause fire. Step5.Attach hose of regulator to the bracket and then tighten the preassembled wing screw . Step6. Insert the bottom of the door (C) to the hole on the metal stand (G) and rotate the top to the unit, this will attach the door (C) to the body.
- Page 15 ASSEMBLY INSTRUCTION Place propane gas tank (not included) into the metal stand (G). Make sure the gas tank sits on the metal stand completely. Regulator Step1:Turn the knob to the position shown in the figure(1). Step2:Press the regulator down in the direction Knob Button shown in the figure(1) while holding down the...
-
Page 16: Operation
OPERATION 1.Make sure the control knob is in the "OFF" position. 2.Open the door and slowly open the valve on the propane gas tank by turning the knob counterclockwise. 3.Close the door on the body. 4.Push the ignition control knob in fully and rotate about 1/4 turn counterclockwise until a click is heard, it may take several attemps to light the burner. -
Page 17: Troubleshooting
• Modification of the unit and/or components including the gas valve assembly. • Use of any component part not manufactured or approved by Teamson design corp. • Use and installation other than what is listed in this manual.