Download Print this page

Instruction Manual - Makita DPV300 Instruction Manual

Cordless sander polisher
Hide thumbs Also See for DPV300:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Maximum
Wool pad
capacities
Sponge pad
Sanding disc
Backing pad
For sanding
diameter
For polishing
Rated speed (n) /
High (2
No load speed (n
)
sanding mode
0
Low (1
polishing mode
Overall length
Rated voltage
Net weight
*1. With battery cartridge (BL1860B).
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
Specifications and battery cartridge may differ from country to country.
The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combinations, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING:
Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or fire.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
):
):
DPV300
80 mm
80 mm
50 mm
46 mm
75 mm
0 - 9,500 min
0 - 2,800 min
160 mm *1
D.C. 18 V
1.3 - 1.6 kg
BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for polishing, smoothing before
painting, finishing surfaces, and removing rust and
paint.
4 ENGLISH
-1
-1
DC18SH

Advertisement

loading