Valor VL100 Connecting Manual

Connect your device to the internet

Connect Your Device to the Internet

VL1 00

Flip the device so that bottom is facing up.

Power off the device before plugging in our

connection type.

Ethernet: Labeled as LAN. Power down,

plug in your LAN connection and tap the

connection icon on the home screen.

Dial: Labeled by Phone Icon. Power down,

[plug in dial cable. Power on and cancel

WifI. When prompted with dial setting

select cancel to be brought to your home

screen to begin transacting.

VL1 00

Power on the device, Select yes (1) for

Wifi, Select your SSID, Enter password

and select

Green Ok

Button. If you're on

another connection type and want to

switch to Wifi, Tap Connection Icon top

of touch screen and select WiFi. Follow

the same instructions as above to

connect. If this is the first time.

Otherwise, you will connect

automatically.

Table of Contents

Do you have a question about the VL100 and is the answer not in the manual?

Page 1 Connect Your Device to the Internet Method 1 & 2 VL1 00 Flip the device so that bottom is facing up. Power off the device before plugging in our connection type. Ethernet: Labeled as LAN. Power down, plug in your LAN connection and tap the connection icon on the home screen.
Page 2 Method 1 VL110 Flip the device so that the bottom is facing up. As shown in the picture, insert the SIM card on the bottom right. Once inserted, put back cover onto the device. Turn the device over and tap the red circle at the top of your touch screen and select GPRS.

Vl110