Advertisement
Connect Your Device to the Internet
Method 1 & 2
V L1 00
Flip the device so that bottom is facing up.
Power off the device before plugging in
your connection type.
Ethernet: Labeled as LAN. Power down,
plug in your Ethernet cable,power back on
and tap the connection icon on the home
screen.
Dial: Labeled with a Phone Icon. Power
down and plug in the phone line. Power
back on and when prompted for WiFi,
press cancel. When prompted For the Dial
setting select cancel to be brought to your
home screen to begin transacting.
Method 3
VL1 00
Power on the device, Select "yes,
Connect" for Wifi, Select your SSID, Enter
password and select the
Green Ok
Button. If you're on another connection
type and want to switch to Wifi, Tap the
Connection Icon on the top of the touch
screen and select WiFi. If this is your first
time connecting, follow the instructions
above. Otherwise, you will connect
automatically.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Valor VL100
Summary of Contents for Valor VL100
- Page 1 Connect Your Device to the Internet Method 1 & 2 V L1 00 Flip the device so that bottom is facing up. Power off the device before plugging in your connection type. Ethernet: Labeled as LAN. Power down, plug in your Ethernet cable,power back on and tap the connection icon on the home screen.
- Page 2 Method 1 VL1 10 Flip the device so that the bottom is facing up (as shown in the picture). Insert the SIM card on the bottom right. Once inserted, put the cover back on the device. Turn the device over and tap connection icon at the top of your touch screen and select GPRS.
Need help?
Do you have a question about the VL100 and is the answer not in the manual?
Questions and answers