Table of Contents
Advertisement
Quick Links
Thank you for purchasing this Electroconcept laser product.
Please read this manual carefully before operating the laser projector and keep the notice in
safe place for future readings.
Legal notice:
Electroconcept SARL reserves the right to make modifications to its products. This manual
has been made with due care but Electroconcept won't take any responsability for any errors,
omissions neither resulting damages due to improper operating of this projector. This laser
projector is for professional indoor use. Please check to be in accordance with applicable
laws in your country before each laser show, in particular safety regulations for laser CLASS
IV product.
Content
LS450-RGB1000
LASER PROJECTOR
INSTRUCTION MANUAL
Advertisement
Table of Contents
Related Manuals for Electroconcept LS450-RGB1000
Summary of Contents for Electroconcept LS450-RGB1000
- Page 1 Electroconcept SARL reserves the right to make modifications to its products. This manual has been made with due care but Electroconcept won’t take any responsability for any errors, omissions neither resulting damages due to improper operating of this projector. This laser projector is for professional indoor use.
- Page 2 1.Warranty: Electroconcept products are guaranteed 2 years (electronic , lasers sources, galvas). Are excluded from warranty : Damages through inappropriate use , inappropriate storage (humidity and/or thermal conditions,...) and lack of maintenance ( seized fan and motors, ...) This product is not intended for continuous use, in order to extend the lifetime of laser sources...
- Page 3 When rigging use safety cords able to resist ten times the weight of the laser projector. Rig the laser projector at least 50 cm away from any wall or flammable objects. Do not cover the laser projector and place it away from heat sources like spotlights to ensure a good air flow around the product.
- Page 4 USB Mode : Mode USB When connected to a computer with mini usb cable, you are able to use it realtime with the MiniIlda Show Laser software Tm as well as download logos directly inside the laser memory. Refer to MiniIlda Show Laser software notice to make these operations. DMX Channels: Description 0 : OFF Mode...
- Page 5 Position Y: 0 none, From 1 to 128 : Position Y fixed From 129 to 255 : Position Y automatic speed Ping Pong style From 0 to 255 : General Analogical Zoom From 0 to 255 : General motor speed from normal to slow From 0 to 255 : Stop time on vector points from normal to slow From 0 to 128 : Bind logos outside window From 128 to 255 : Crush logos outside window...
- Page 6 After unpacking the product, packaging materials (plastic bags, polystyrene, foam,…) must not be left within children’s reach, this may be dangerous. This product must be only used by an adult. Do not let a child use it or play with it. Do not put this product under these conditions : - In a damp location - In a location subject to shock and vibrations...
Need help?
Do you have a question about the LS450-RGB1000 and is the answer not in the manual?
Questions and answers