In this Mode, the Unit operates intermittently. When
the current humidity is higher than the preset humidity
level by 5%, the compressor turns on and the Fan starts
operating with the preset Fan Speed. When the current
humidity is lower than the preset humidity level by 5%, the
compressor stops operating, Fan stops running. When the
current humidity is within the +-5% range of the preset
humidity level, the Unit operates at the default operation
mode with the humidity level preset at 50%.
Select high or low fan speed.
Place the laundry at the spot where the warm dry air can
reach to.
The bottom part of the
Unit heats up as a result
of the operation of the
compressor.
Need help?
Do you have a question about the RAD-Y200H and is the answer not in the manual?
Questions and answers