Zenith XBV243 Service Manual page 45

GEAR DRIVE & CAM (FIG. A-7-1/2)
1) Remove Washer (W2) and lift the Gear Drive.
2) Unhook Hook (H14) of the Gear Cam and lift the
Gear Cam.
NOTE: When reassembling, align the Gear Drive Hole(A)
and the Gear Cam Hole(B) in a straight line after
the Gear Drive Hole(C) is aligned with the Chassis
Hole. (See Inset)
GEAR SECTOR (FIG. A-7-3)
Unhook Hook (H15) of the Base Loading fron the
bottom of the Chassis and lift the Gear Sector.
Gear Cam Hole(B)
Gear Drive Hole(C)
VR168 - 923-03485
All manuals and user guides at all-guides.com
MECHANISM - VCR
(H14)
(Fig. A-7-2)
Gear Drive Hole(A)
Fig. A-7
4-9
PLATE SLIDER (FIG. A-7-4)
Lift the Plate Slider.
LEVER TENSION (FIG. A-7-5)
1) Unhook the (A) portion of the Lever Tension from
Hook (H16) of the Chassis.
2) Turn the Lever Tension counterclockwise and lift.
LEVER SPRING (FIG. A-7-6)
Unlock Locking Tab (L3) from the bottom of the
Chassis and lift the Lever Spring.
Gear Cam
Washer (W2)
Gear Drive
(Fig. A-7-1)
(A)
(L3)
(H15)
(H16)
Chassis
Gear Sector
(Fig. A-7-3)
Plate Slider
(Fig. A-7-4)
Lever Tension
(Fig. A-7-5)
Lever spring
(Fig. A-7-6)
Base Loading
D35E COMBO - SERVICING