6. Advanced Set Functions
Press the "
advanced set function, the "SET" Symbol will appear on
the tertiary reading. Repeat to press the "
and hold for 3 seconds again or idle for 6 seconds to
exit this function. In the set function, press the "
"
" button to adjust, press the "
automatically toggle to next options. The sequential
operation and explanations are shown in the following
flow chat.
6-1 Air velocity Unit Setting
Press the "
velocity unit. The unit symbol will flash on the LCD.
6-2 Temperature Setting
Press the "
°C or °F unit. The unit symbol will flash on the LCD.
6-3 Backlight ON/OFF
Press the "
off.
" button and hold for 3 seconds into the
" or "
" or "
" button to turn the backlight on and
" button to set and
" button to select the air
" button to select the
13
" button
" or