Page 1
USER’S MANUAL Saddle Stool(set of 2) HW58978/79 THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used.
PRODUCT ASSEMBLY Read this instruction carefully.Refer hardware and furniture parts list for guidance.Be sure all parts are complete before assembling.Place all wooden furniture part on aclean and flat soft syrface to prevent scratchs.Refer steps provided as assembling guide.
Hardware List Actual size JBCW Screw Allen Key 1 x 16 2 x 1 M7 x 50mm M4 x 55mm Wood Bullton 3 x 16...
Page 5
STEP 1 Attached the stool leg A with seat C . Do not tighten any hardware completely! STEP 2 Tighten stool leg A to stool seat C first,and then tighten crossbar B to leg A completely after alignment is done.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish.
Page 8
Replacements for missing or damaged parts will be shipped ASAP ! US office: Fontana UK office: Ipswich AU office: Truganina Contact Us ! Do NOT return this item. US:cs.us@costway.com UK:cs.uk@costway.com Contact our friendly customer service department for help first. AU:cs.au@costway.com...
Need help?
Do you have a question about the HW58978 and is the answer not in the manual?
Questions and answers