Advertisement
*HWWLQJ 6WDUWHG
)LJXUH 3RZHU DQG 'LPPHU %XWWRQV
1. Turn the power on by pressing the power button, illustrated above.
2. When the start-up sequence is complete, the system is ready for use.
3. You can now open and run the desired applications.
3RZHU 6XSSO\
Power is supplied by the vehicle to which it is mounted, or an external AC
power supply. PSC provides the following four power accessories:
Power Cable with Bare leads 8 foot long (One bare leads power cord is included with the
Power Supply
DC to DC Power Converter
DC/DC Delay Timer/Filter
Refer to
7XUQLQJ WKH 8QLW 2II
1. Close all applications.
2. Select
3. When
Power Button
Upon initial boot-up the Falcon 4620 will go through the calibration
sequence. Refer to "Calibrating the Touchscreen" on page
information.
for more information on power supplies.
page 25
Start > Shut down
It is now safe to turn off your computer
the power button for seven (7) seconds or until the screen goes blank.
Dimmer Buttons
unit when ordered.)
110/220 VAC Power supply (70w)
DC to DC Converter (18VDC - 72 VDC for vehicles > 24
volts.)
DC/DC Delay Timer/Filter
.
dialog opens, press and hold
for more
7
Ã
)DOFRQ
Advertisement
