Advertisement
Foreword and general information
Method of disconnecting and connecting push-pull type coupler
Type 2
1. Disconnection
1) Hold the tightening portion and push body (7)
straight until sliding prevention ring (6)
contacts contact surface (a) of the hexagonal
portion at the male end. (Fig. 6)
2) While holding the condition of Step 1), turn
lever (8) to the right (clockwise). (Fig. 7)
3) While holding the condition of Steps 1) and
2), pull out whole body (7) to disconnect it.
(Fig. 8)
2. Connection
q
Hold the tightening portion and push body (7)
straight until sliding prevention ring (6) con-
tacts contact surface (a) of the hexagonal
portion at the male end. (Fig. 9)
00-24
0 0 - 2 4
PC600, 650, 700-8E0
Advertisement
