Table of Contents
Related Manuals for Esma E397
Summary of Contents for Esma E397
- Page 1 Celebrating over 30 years of excellence in manufacturing ultrasonic cleaning equipment, electropolishing equipment and associated chemistries ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919...
- Page 2 Celebrating over 30 years of excellence in manufacturing ultrasonic cleaning equipment, electropolishing equipment and associated chemistries ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919...
- Page 3 The unit consists of two sections: 1) Tank cabinet to be installed in the counter and 2) Control Plate to be installed on front of counter. (Models 397-RC and 498-RC). The tank size is 14quart for Model E397 and 15quart for Model E498.
-
Page 4: Installation
3 ½” between counter opening and front of cabinet. If this is not possible because of cabinet design, the control plate can be positioned on either side of unit. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919... - Page 5 The unit is rated at 350 W, 120 VAC, 50/60 HZ. The unit is fused at 5 AMP, 250 VAC with a replaceable fuse located underneath the unit. The power cord must be connected to a three-way grounded outlet. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919...
- Page 6 If the main power is turned off during a function, the process will continue in that function when the power is turned back ON. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919...
-
Page 7: Operation
In the program 3 gallons of water are used on the initial fill cycle with an additional 6 gallons used in the fill- rinse steps, D to H for a total of 9 gallons of hot water used per cycle. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919... -
Page 8: Cleaning Agent
It is recommended to use a liquid cleaning agent because some powders take too long to go into solution. ESMA has a liquid cleaner, E589 where it is recommended to use 2 to 4 tablespoons per tank load. Some general purpose detergents may be all that is required to clean your items. Depending on types of parts and debris to be removed, some experimentation will be required with type of cleaners and concentrations. -
Page 9: Maintenance
The unit is manufactured of 316 and 304 stainless steel. Clean with a commercially available cleaner for stainless kitchen appliances. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919... - Page 10 Celebrating over 30 years of excellence in manufacturing ultrasonic cleaning equipment, electropolishing equipment and associated chemistries equipment, electropolishing equipment and associated chemistries ESMA, Inc. ESMA, Inc. P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919...
Need help?
Do you have a question about the E397 and is the answer not in the manual?
Questions and answers