Fusion 24141 Quick Start Manual

2 large solar pathway lights

Table of Contents

Download this manual

2 LARGE SOLAR

PATHWAY LIGHTS

model no. 24141

Assembly Instructions

Important: Please read this manual carefully

before beginning assembly of this product.

Keep this manual for future reference.

Overview

This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.

Please read these instructions thoroughly prior to installation, then store in a safe place for future reference. If at any time

you are unclear about this product, or require further assistance please do not hesitate to contact our trained professionals

operating the customer support line at 1-877-615-1378 Monday to Friday between the hours 8:00 AM to 4:00 PM Eastern

Standard Time or email support@fusionproducts.ca.

During the day your solar panel will convert the sun's light and/or UV rays into electrical power that will charge the rechargeable

battery. When it becomes dark, the solar light will turn on using the power stored in the rechargeable battery as it will detect no

daylight. The unit's light output strength and duration depends on how many hours and how much sunlight and/or UV rays your

panel absorbs throughout the day.

For maximum output place the solar panel in an area where there is direct sunlight for at least 8 hours in a given day. Do not

install your solar light in a shaded area. The selected location should not be near nighttime light sources such as porch lights,

street lights or pool lights, as these may cause the solar light to turn off prematurely.

Table of Contents

Do you have a question about the 24141 and is the answer not in the manual?

Page 1 2 LARGE SOLAR PATHWAY LIGHTS model no. 24141 Assembly Instructions IMPORTANT: Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. Overview This product is designed to the highest technical specifications and standards. It will supply years of maintenance-free use.
Page 2 24141 Getting Started Please do not throw away any packing material until all parts are verified as present. Features Included In Box (2) solar lights and instructions Runtime Up to 8 hours LEDs 1 warm white SMD LED in each light...
Page 3 24141 Assembly & Operation For First Time Use: Step 1: Insert Pole (C) over base of Lens (B) until secure. Step 2: Remove pre-installed Ground Spike (D) from base of Pole (C). Insert base of Ground Spike (D) so that spiked end now faces downward.
Page 4 1-Year Limited Product Warranty This product is covered under a one year limited warranty. Fusion Products Ltd. warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from date of purchase.