Download Print this page

Komatsu PC170LC-11 Shop Manual page 23

Hydraulic excavator

Advertisement

00 INDEX AND FOREWORD
Abbrevia-
Actual word spelled out
tion
NO
Normally Open
Open-center Load
OLSS
Sensing System
PC
Pressure Compensation Hydraulic system
Palm command control
PCCS
system
PCV
Pre-stroke Control Valve Engine
Proportional Pressure
PPC
Control
PPM
Piston Pump and Motor
PTO
Power Take Off
Power Tilt and power
PTP
Pitch dozer
Roll-Over Protective
ROPS
Structure
Selective Catalytic Re-
SCR
duction
Le Systeme Internation-
SI
al d' Unites (Internation-
al unit system)
SOL
Solenoid
TWV
2-Way Valve
Variable Geometry Tur-
VGT
bocharger
*1: Code for applicable machine model
D: Bulldozer
HD: Dump truck
HM: Articulate dump truck
PC: Hydraulic excavator
PC170LC-11
Purpose of use (major ap-
plicable machine (*1), or
component/system)
Electrical system, Hydraul-
ic system
Hydraulic system
Steering
(D)
Hydraulic system
Hydraulic system
(D, PC, etc)
Power train system
Work equipment
(D)
Cab and canopy
Urea SCR system
Unit
Electrical system
Hydraulic system
Engine
Explanation
Characteristics of electrical or hydraulic circuits.
Circuit is normally open if it is not actuated, and it
closes when it is actuated.
Hydraulic system that can operate multiple actua-
tors at the same time, regardless of the load.
A function used to correct oil pressure.
System in which a controller instantly analyses
data from each lever, pedal, and dial, and per-
forms optimum electronic control of the engine
and transmission.
This valve is installed at inlet port of pump and it
adjusts fuel intake amount in order to control fuel
discharged volume of supply pump.
This system is used for controlling proportional
pressure. It moves actuators in proportion to the
oil pressure.
Piston type hydraulic pump and motor.
Power take-off mechanism.
This function performs hydraulic control of the tilt
and pitch of the bulldozer blade.
If a machine tips over, this structure protects the
operator wearing a seatbelt from being crushed.
(Operator Protective structure when tipping)
This performance is standardized as ISO 3471.
It is exhaust gas purifier using urea water con-
verts nitrogen oxides (NO
and water by oxidation-reduction reaction. It may
also be mentioned as exhaust gas purification
catalyst or part of the name of related devices.
Abbreviation for "Le Systeme International d' Uni-
tes". It is the universal unit system and "a single
unit for a single quantity" is the basic principle ap-
plied.
It refers to an actuator consisting of a solenoid
and an iron core that is moved by the magnetic
force when the solenoid is energized.
Solenoid valve that switches over direction of
flow.
The turbocharger on which the cross-section
area of the exhaust passage is made variable.
ABBREVIATION LIST
) to harmless nitrogen
x
00-21

Advertisement

loading

This manual is also suitable for:

35001