Seat Instructions; Shield And Guards - MASSEY FERGUSON MF2200 Operator's Manual

1. Safety

1.2.4 Seat instructions

Put on the seat belt before you operate the
machine. Always sit in the seat and have the seat
belt on while you operate the machine. Replace
the seat belts when they become worn or broken.
Do not use a seat belt loosely. Make sure that
there is some tension on the seat belt. Do not
wear the seat belt in a twisted condition or
pinched between the structural parts of the seat.
Put on the seat belt if the instructional seat is
used. Use the instructional seat only to train new
operators or to find a problem. The instructional
seat is only for short periods of use.
Do not let children use the instructional seat or be
in the cab. Do not let other persons use the
instructional seat or be in the cab.
Drive the machine at slower speed and on level
ground when the instructional seat is used. Do not
start, stop, or turn quickly when the instructional
seat is used. Do not drive on highways or public
roads when the instructional seat is used.

1.2.5 Shield and guards

WARNING: Entanglement hazard.
Belts and components that rotate.
Severe personal injury or death can
occur.
Do not open, remove, or put your
hand behind shields if the engine is
running. Stop the machine before
doing service to the machine.
All shields and guards must be in the correct position and in good condition. Keep away from the
components that rotate.
20
Fig. 8
Fig. 9
GUID-F38524AD-E24F-4FCC-9154-E5357EFDE9D2 [V3]
GUID-5BA328EA-7732-4CE8-97B2-6511151E943C-high.jpg [High]
GUID-9398BDE6-F83A-4855-B266-E86D0B48B9D7 [V10]
GUID-6163F2D6-39D6-48BF-871C-AC346EE022D2-high.jpg [High]
Large Square Baler
700746226F