LG E1960S Owner's Manual page 10

Connecting the Display
Connecting with the PC
1.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
2.
Connect signal input cable
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B
Connect D-sub(Analog signal) Cable
Connect HDMI Cable
C
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
Varies according to model.
AV equipment
(Set-Top Box, DVD,
Video,
Video Game Console)
* HDMI is optimized on the AV equipment.
* Not supported PC
Wall-outlet type
All manuals and user guides at all-guides.com
1 2
and power cord in order, then tighten the screw
Headphone/Earphone Input
DVI-D (This feature is not
available in all countries.)
When using a D-Sub signal input cable
connector for Macintosh
Mac adapter : For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-
sub VGA connector on the supplied cable
to a 15 pin 2 row connector.
9
E2260V/E2360V
Connect the signal
input cable and
tighten it up by
turning in the
direction of the
arrow as shown in
the figure.