Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
VWP0 / VWP1 / VWP2 / VWP3 / VWP4 / VWPHD
Screen Size: 33-90"
Guide Max. Weight: 45-80kg
Revised 15/12/20
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol ADAPTA-WALL VWP0
Summary of Contents for Unicol ADAPTA-WALL VWP0
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
- Page 2 01865 767676 sales@unicol.com www.unicol.com TOOLS REQUIRED INSTALLERS REQUIRED COMPONENTS DESCRIPTION Pop-Out Mount Body Adjustable Mount Arms Revised 15/12/20...
- Page 3 01865 767676 sales@unicol.com www.unicol.com HALF SCREEN WIDTH FULL SCREEN WIDTH STEP 1 Measure the width and height of the screen(s) to be installed. On the wall, mark out a grid as shown above. Position each mount so that the centreline guides line up exactly with the arrows on the mount body.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 5 STEP 4 Using another team member, lift the screen up and Genlty push on the centre bezel of the screen in gradually offer it up to the back plate. Gently tilting order to pop the mount out. Alternatively, utilise the the screen forward, hook the arms over the lip of optional pop out mechanism pull cord.