Canon SELPHY ES30 Beginner's Manual page 21

No Image. (continued from previous page)
Check whether readable image data is recorded on the memory card.
•
• The image file name (folder name) sometimes cannot be recognized if it contains
double-byte characters (Japanese, Chinese or Korean). Change double-byte
characters to single-byte alphanumeric characters.
Use a personal computer to print data that has been edited or processed on a
•
personal computer.
Hardware Error
Check if there are other problems than cartridge problems.
•
• Turn the printer and camera power off, then turn on again. If the error message does
not clear, contact a Canon Customer Support center for assistance.
Cartridge cover is open
• Close the cartridge cover. If the error message does not clear, turn the power off and
on again.
This camera cannot print B/W
Insert memory card to print
• Black and white printing is not possible when a camera is connected (except when
(PictBridge) is displayed on the LCD monitor of the camera). Insert a memory
card to print.
Creative Cartridge Inserted
Change the cartridge
Printing from a camera or a mobile phone using the gold or silver print supporting
•
cartridge (Easy Photo Pack E-P20G/E-P20S) is not possible. Change the cartridge to
a cartridge other than the gold or silver print supporting cartridge.
Cartridge has been changed
The cartridge was changed for a cartridge of a different size after the print menu was
•
displayed. Insert a cartridge of the same size or change the print settings.
Cartridge has been changed
Trim Settings Adjusted
• If the cartridge is changed after the trimming settings have been made, the printer
automatically sets the trimming frame again to fit the paper size.
21