Whirlpool HB124 Operation Manual page 15

【Function Descriptions】
Delay Vent Function
Start: press "Delay Vent" button, LCD "Vent" function displays, and starts running. The default
mode will run 15 minutes before it stops.
Stop: press "Stop" button, and LCD "Vent" function and timer will turn off, and the machine will
stop automatically.
Louver Function - Auto (Up / Down)
Start: default running the On and Off operation, same with Fan. If it is ON, LCD "
icon will displaced and
function is invalid, and the louver will resume to 0 degree position. When it is fan
mode, the default is 90 degree louver position.
Auto Swing: when the fan is running, press the "Swing" button, the louver will turn
from 90 degree position to swing ranging from 45 degree to 120 degree. Press "Swing"
button again, auto louver function will stop, and if you press it again, it will run
auto-swing again.
First start
0 degree
Restart
Stop: when press "Stop" button or pre-set time runs over, the louver will return to 0 degree
position (auto louver will stop operate).
Louver Function - Manual (Left / Right)
Left and right louver function to provide selection of wide airflow distribution of
degree, or concentrated airflow.
Ionizer Function
Start: default running the "on" and "off" operation, same with Fan. If fan is ON, Ionzier
icon " " will turn on. If fan is off, the icon
Stop: when Ionizer is running, pressing the "Ionizer" button will stop the function, and
LCD display " "
and the LCD display
" " icon will disappear when it is off. When it is off, the swing
90degree
stop and shut off
automatically record the angel setting last time
will turn off. Press the "Ionizer" button again, Ionizer will turn on
" " will turn on as well.
swing within 45~120 degrees
stop at either angle
→
" " will turn off Ionizer function will be invalid.
-14-
stop at either angle
swing within 45~120 degrees
up to 120
again,
"
the