Advertisement
4
First Use of the TPD-430-H Series
Use a flat-head screwdriver to
set rotary switch
2. Supply power to the TPD-430-H/430-H-EU, wait
for several seconds and then you can see the
default program run on it.
3. Try to touch on the icons on the screen of the
TPD-430-H/430-H-EU and you can find that
TPD-430-H/430-H-EU switches to another page.
5
Creating First Project
To create your first project of the TPD-430-H/430-H-EU, install the free development tool,
HMIWorks and then refer to <<TouchPAD_getting_started.pdf>>, which can be found on the
FTP:
ftp://ftp.icpdas.com/pub/cd/touchpad/document/english/programming_guide/
TPD-430-H/430-H-EU Quick Start, version 1.0
Copyright © 2017 ICP DAS Co., Ltd.
Connect wires as the figure. And set the rotary
1.
switch to zero (At this point, the power is not yet
supplied).
VDC (+12~+48V)
GND
External Power
All Rights Reserved.
Last Revised: May 2017
E-mail: service@icpdas.com
- 3 -
Advertisement
