Main Unit; Specifications - Kenwood RD-C717 Service Manual

RD-C717/LS-C717

Main unit

[Amplifier section]
Rated output power...20 W + 20 W (1 kHz, 10% T.H.D., at 8 Ω)
D.AUDIO/ AUX (Sensitivity/ Impedance) .......... 500 mV/10 k Ω
SUBWOOFER PREOUT (Level/ Impedance) ........1.5 V/10 kΩ
[Tuner section]
FM tuner section
Tuning frequency range ......................87.5 MHz ~ 108.0 MHz
AM tuner section
Tuning frequency range ...........................531 kHz ~ 1,602 kHz
[DVD player section]
Laser ........................................................Semiconductor laser
[Video section]
Video output format ............................................................PAL
Composite video output level ...............................1 Vp-p (75 Ω)
Component Video output level
Y-signal ............................................................1 Vp-p (75 Ω)
CB/ CR-signal ...............................................0.7 Vp-p (75 Ω)
HDMI output terminal .......................................Type A (19 PIN)
[USB interface]
USB standard ....................................................... USB 1.1/2.0
Maximum supply current ...............................................500 mA
File system ............................................................. FAT 16/ 32
[SD card interface]
Format ........................................................... SD memory card
Usable SD cards........SD/SDHC, miniSD, microSD/SDHC card
File system ............................................................. FAT 16/ 32
[General]
Provided AC adapter ..............DC 18 V (AC 230 - 240 V, 50 Hz)
Power consumption (Incl. AC adapter) ............................. 30 W
Power consumption in standby mode ..................... 1 W or less
Dimensions ............................................................W : 190 mm
Weight (net) ................................................................... 1.4 kg

Specifications

(with iPod applied part) W : 286 mm
H : 240 mm
D : 142 mm
Speakers
Enclosure ....................................................... Bass-reflex type
Speaker configuration
Woofer ...................................................... 86 mm, cone type
Tweeter .................................................... 36 mm, cone type
Impedance .........................................................................8 Ω
Maximum input ................................................................ 20 W
Dimensions ............................................................W : 170 mm
Weight (net) ..................................................... 1.1 kg (1 piece)
Notes:
• Kenwood follows a policy of continuous advancements in-
development. For this reason specifications may be
changed without notice.
• Sufficient performance may not be exhibited at extremely
cold locations (where water freezes).
Kenwood Corporation
H : 238 mm
D : 132 mm