Kersten Weedo II Original Operating Instructions

Single-axis weed brush
Table of Contents

Advertisement

Quick Links

Pos: 2 / Anleitungen / Bookmark / Kersten front page language-independent area @ 15 \ mod_1549625959450_6.docx @ 257678 @ @ 1
 
Original operating instructions
Single-axis weed brush Weedo II
Pos: 3 / Anleitungen / Bookmark / Kersten front page language-dependent area @ 15 \ mod_1549625757522_6.docx @ 257657 @ @ 1
Order number:B00100
=== End of list for bookmark title page ===
from machine no .:62954 Rev .: R00
Was standing:
2019-03-01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Weedo II and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kersten Weedo II

  • Page 1 Pos: 2 / Anleitungen / Bookmark / Kersten front page language-independent area @ 15 \ mod_1549625959450_6.docx @ 257678 @ @ 1   Original operating instructions Single-axis weed brush Weedo II Pos: 3 / Anleitungen / Bookmark / Kersten front page language-dependent area @ 15 \ mod_1549625757522_6.docx @ 257657 @ @ 1 Order number:B00100 from machine no .:62954 Rev .: R00...
  • Page 2 2019-03-01 2 / 79...
  • Page 3 Pos: 5 / Anleitungen / Bookmark / Kersten Copyright 2019 @ 14 \ mod_1547822953748_6.docx @ 252265 @ @ 1   All rights reserved. This documentation is protected by copyright. Kersten Arealmaschinen GmbH reserves all rights that have not been expressly granted. Without prior written consent and except in cases permitted by law, this documentation may not be reproduced, distributed or made publicly available in any other way.
  • Page 4 Pos: 7 / Anleitungen / Bookmark / Kersten Service @ 5 \ mod_1499148449207_6.docx @ 95389 @ @ 1   Information on the operating instructions These instructions enable safe and efficient handling of the machine. The instructions are part of the machine and must be kept in the immediate vicinity of the machine and accessible to personnel at all times.
  • Page 5: Table Of Contents

    foreword overview Overview of uniaxial weed brush Single-axis weed brush Weed brush with splash guard safety Symbols in this manual Pictograms Intended Use Work and danger areas Safety during the work process 18th Safety devices 3.6.1 Emergency shutdown via dead man's lever 3.6.2 Splash guard Security marking...
  • Page 6 Cause of the fault and its remedy Malfunction table 10th Disassembly, disposal 10.1 safety instructions 10.2 Disassembly 10.3 disposal Technical data single-axis weed brush Weedo II 11.1 layout 11.2 General technical data 11.3 Key engine data Weedo II (Honda) 2019-03-01 6 / 79...
  • Page 7 11.4 Engine key figures Weedo II (Briggs & Stratton) 11.5 Declaration of conformity 2019-03-01 7 / 79...
  • Page 8: Foreword

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 10 / Instructions / 2 Overview / Kersten / 1 Foreword @ 5 \ mod_1499071751798_6.docx @ 95313 @ 1 @ 1  ...
  • Page 9 (6). The weeds are removed from the ground with the help of brush elements on the rotating weed brush (6). Item: 15 / Instructions / 2 Overview / Kersten / 2.2 Weedo II single-axis weed brush @ 14 \ mod_1547824405776_6.docx @ 252343 @ 2 @ 1 2019-03-01...
  • Page 10: Overview Of Uniaxial Weed Brush

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. 2.2 Single-axis weed brush Fig.: Overview of front and back (exemplary) Handholm Reversing starter of the internal combustion engine...
  • Page 11 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. has a filter unit (13). The arrangement of these components may differ depending on the type of engine installed.
  • Page 12: Weed Brush With Splash Guard

    Carrying handles (5) can be used for lifting or lashing the uniaxial weedbrush can be used. Item: 16 / Instructions / 2 Overview / Kersten / 2.3 Weed brush Weedo II @ 14 \ mod_1547824679334_6.docx @ 252366 @ 2 @ 1 2.3 Weed brush with splash guard Fig.
  • Page 13 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. The weed brush is screwed to the uniaxial weed brush over the working head (3). The weed brush consists of a steel structure with a hydraulic motor (2) driven by hydraulic hoses (1).
  • Page 14: 3Rd Safety

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 19 / Anleitungen / 3 Sicherheit / Allgemein / 3 / 3.1 Sicherheit - Symbols in these instructions @ 3 \ mod_1480928218861_6.docx @ 59557 @ 12 @ 1 3 safety    ...
  • Page 15 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Tips and recommendations This symbol highlights useful tips and recommendations, as well as information for efficient and trouble-free operation.
  • Page 16: Pictograms

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 20 / Instructions / 3 Safety / General / 3.01 Pictograms @ 6 \ mod_1504524108960_6.docx @ 100806 @ 2 @ 1 Pictograms 3.2 Pictograms...
  • Page 17 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 26 / Anleitungen / 3 Sicherheit / Allgemein / 3.01.07 Operating instructions and safety instructions @ 6 \ mod_1504525116752_6.docx @ 101019 @ @ 1...
  • Page 18: Intended Use

    Unauthorized changes to the machine lead to the manufacturer's disclaimer for the resulting damage. Pos: 32 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.02.1 Work and danger areas Weedo II @ 14 \ mod_1548252889286_6.docx @ 253207 @ 2 @ 1 2019-03-01...
  • Page 19: Work And Danger Areas

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    3.4 Work and danger areas Fig.: Work area, safety area and danger area RED �� Danger zone •...
  • Page 20 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. WARNING Risk of injury / danger of environmental damage from working / staying in the danger zone! Working / staying in the danger zone creates the risk of injury and damage to the environment and property (on the machine or system).
  • Page 21 Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 33 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.03 Safety during the work process Weedo II @ 14 \ mod_1548253019429_6.docx @ 253273 @ 2 @ 1 3.5 Safety during the work process...
  • Page 22 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Before starting work WARNING Risk of injury / risk of environmental damage due to non-compliance with the safety measures! Failure to observe the safety measures creates the risk of injury and damage to the environment and property.
  • Page 23 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Risk of injury / risk of environmental damage due to non-compliance with the safety measures! Failure to observe the safety measures creates the risk of injury and damage to the environment and property.
  • Page 24: Safety Devices

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Risk of injury / risk of environmental damage due to non-compliance with the safety measures! Failure to observe the safety measures creates the risk of injury and damage to the environment and property.
  • Page 25: Emergency Shutdown Via Dead Man's Lever

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 35 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.03.1 Emergency shutdown via dead man's lever Weedo II @ 14 \ mod_1548252942313_6.docx @ 253229 @ 3 @ 1 3.6.1 Emergency shutdown via dead man's lever...
  • Page 26: Splash Guard

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    3.6.2 Splash guard Fig.: Splash guard frame with signal tape Splash guard frame with signal tape...
  • Page 27: Fundamental Dangers At Work 24Th

    The residual risks and the resulting behaviors and measures are listed below. Pos: 39 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.06.1 Basic dangers at work Weedo II @ 15 \ mod_1548410570337_6.docx @ 254879 @ 3 @ 1 3.8.1 Fundamental dangers at work   ...
  • Page 28 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Improper transportation NOTE Property damage due to improper transportation Improper transport can cause items to fall or fall over. This can result in considerable damage to property.
  • Page 29 • Do not handle or smoke near an open fire. Pos: 40 / Anleitungen / 3 Sicherheit / Kersten / 3.06.2 Danger from noise oÜ @ 6 \ mod_1504534434985_6.docx @ 101199 @ @ 1 Noise level Valid noise protection regulations as well as the warnings in the entire documentation must be observed.
  • Page 30 Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 41 / Instructions / 3 Safety / Kersten / 3.06.4 Dangers from mechanics oÜ @ 6 \ mod_1504534457155_6.docx @ 101212 @ @ 1...
  • Page 31: Environmental Protection

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 43 / Anleitungen / 3 Sicherheit / Kersten / 3.06.8 Dangers from chemical substances oÜ @ 6 \ mod_1504534479259_6.docx @ 101238 @ @ 1...
  • Page 32: Safety Instructions For Maintenance / Troubleshooting

    Disposal must be carried out by a specialist disposal company. Pos: 45 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.20 Safety instructions for maintenance / troubleshooting Weedo II @ 14 \ mod_1548253078909_6.docx @ 253316 @ 2 @ 1 3.10Safety instructions for maintenance / troubleshooting...
  • Page 33 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. DANGER Danger to life or injury due to improperly performed maintenance work / troubleshooting work! Improper maintenance work / troubleshooting work can result in death or injury, as well as property damage to the machine.
  • Page 34 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. WARNING Risk of injury / risk of environmental damage due to insufficient / faulty maintenance! A lack of maintenance creates the risk of injury and damage to the machine and the environment and property.
  • Page 35: Safety Instructions For Disassembly And Disposal

    15 bar. Pos: 46 / Anleitungen / 3 Sicherheit / Kersten / Weedo II / 3.21 Safety instructions for disassembly / disposal Weedo II @ 15 \ mod_1548934239745_6.docx @ 256256 @ 2 @ 1   ...
  • Page 36: 4Th Functional Description

    Item: 49 / Instructions / 4 Functional description / General / 4 Functional description (heading only) @ 6 \ mod_1515154626825_6.docx @ 129787 @ 1 @ 1 4 Functional description    Item: 50 / Instructions / 2 Overview / Kersten / 2.2 Single-axis weed brush Weedo II @ 14 \ mod_1547824405776_6.docx @ 252343 @ 2 @ 1    4.1 Single-axis weed brush Fig.: Overview of front and back (exemplary)
  • Page 37: Weed Brush With Splash Guard

    Carrying handles (5) can be used for lifting or lashing the uniaxial weedbrush can be used. Item: 51 / Instructions / 2 Overview / Kersten / 2.3 Weed brush Weedo II @ 14 \ mod_1547824679334_6.docx @ 252366 @ 2 @ 1   ...
  • Page 38 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. The weed brush is screwed to the uniaxial weed brush over the working head (3). The weed brush consists of a steel structure with a hydraulic motor (2) driven by hydraulic hoses (1).
  • Page 39: Transport, Packaging And Storage

    Item: 57 / Instructions / 5 Transport and storage / Kersten / 5.2 Packaging (without symbols on the packaging and without type of packaging) @ 6 \ mod_1504530537476_6.docx @ 101105 @ 2 @ 1 5.3 packaging...
  • Page 40: Transport Of The Machine

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    5.4 Transport of the machine NOTE Property damage due to improper handling! Improper handling of the machine can lead to damage.
  • Page 41 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Fig.: Components for transporting the machine Transport bracket Handles To transport the machine by crane, use the eyelet on the existing transport bracket (1) on the uniaxial weed brush.
  • Page 42: Assembly / Installation, Installation, Initial Commissioning

    (See Chapter 3rd safety on page ) Pos: 63 / Anleitungen / 6 Montage / Aufstell, Erst-IBN / Kersten / UB Easy / 6.2 Connecting / disconnecting hydraulic hoses @ 13 \ mod_1544014582845_6.docx @ 241088 @ 2 @ 1   ...
  • Page 43: Service

    (See Chapter 3rd safety on page ) Item: 68 / Instructions / 7 Operation / Kersten / Weedo II / 7.1 Adjusting the handrail in height and inclination @ 14 \ mod_1548253517455_6.docx @ 253427 @ 2 @ 1    ...
  • Page 44 Allow the locking bolts to snap into place by pulling and turning the bolt handles (1) clockwise by 180⁰. Item: 69 / Instructions / 7 Operation / Kersten / Weedo II / 7.8a Overview of the function levers for the start @ 15 \ mod_1548680339833_6.docx @ 255800 @ 2 @ 1 2019-03-01...
  • Page 45: Overview Of The Function Levers For Starting

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    7.3 Overview of the function levers for starting Fig.: Overview of the function levers for starting on the handlebar...
  • Page 46: Internal Combustion Engines Regulate With The Throttle

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 70 / Instructions / 7 Operation / Kersten / Weedo II / 7.8b Control the combustion engine with the throttle @ 15 \ mod_1548681041985_6.docx @ 255900 @ 2 @ 1 7.4 Internal combustion engines regulate with the throttle...
  • Page 47: Prepare The Internal Combustion Engine For Starting

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 71 / Instructions / 7 Operation / Kersten / Weedo II / 7.8c Prepare the internal combustion engine: Check the fuel and oil level, open the fuel tap @ 14 \ mod_1548253515111_6.docx @ 253339 @ 2 @ 1 7.5 Prepare the internal combustion engine for starting...
  • Page 48: Start The Internal Combustion Engine

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    7.6 Start the internal combustion engine DANGER Danger to life or injury from escaping exhaust gases in confined spaces! Escaping exhaust gases in confined spaces pose a risk of death or injury and damage to the machine.
  • Page 49: Weed Brush Driving With The Dead Man's Device

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 73 / Instructions / 7 Operation / Kersten / Weedo II / 7.8e Drive weed brush with the dead man's device @ 15 \ mod_1548680853932_6.docx @ 255876 @ 2 @ 1 7.7 Weed brush driving with the dead man's device...
  • Page 50 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Imminent danger to human health and environmental and property damage. Risk of injury / risk of environmental damage due to the weed brush...
  • Page 51: Drive

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 74 / Instructions / 7 Operation / Kersten / Weedo II / 7.9 Driving @ 14 \ mod_1548253515634_6.docx @ 253361 @ 2 @ 1 7.8 Drive...
  • Page 52: Off

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 75 / Instructions / 7 Operation / Kersten / Weedo II / 7.10 Parking @ 14 \ mod_1548253516884_6.docx @ 253405 @ 2 @ 1 7.9 Off...
  • Page 53: Requirements For Optimal Weed Removal

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 76 / Instructions / 7 Operation / Kersten / Weedo II / 7.11 Recommendations for optimal weed removal / left-hand traffic @ 15 \ mod_1550829385490_6.docx @ 259750 @ 2 @ 1 7.10Requirements for optimal weed removal...
  • Page 54: Set Working Height

    Weed removal should not be carried out in dry conditions. Item: 77 / Instructions / 7 Operation / Kersten / Weedo II / 7.2 Working height adjustment @ 15 \ mod_1548688540338_6.docx @ 255977 @ 2 @ 1 7.11 Set working height    ...
  • Page 55 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. The frame is partially decoupled from the axle of the chassis by pulling the adjusting lever. Risk of injury if the chassis falls unexpectedly! If the chassis falls unexpectedly when the control lever is pulled, there is a risk of injury and damage to property (on the machine).
  • Page 56: Align The Weed Brush Horizontally

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Pos: 78 / Instructions / 7 Operation / Kersten / Weedo II / 7.3a Horizont. Aligning the weed brush (right-hand / left-hand traffic) @ 15 \ mod_1548686877801_6.docx @ 255954 @ 2 @ 1 7.12Align the weed brush horizontally...
  • Page 57: Change The Direction Of Rotation Of The Weed Brush

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 79 / Instructions / 7 Operation / Kersten / Weedo II / 7.3b Change the direction of rotation of the weed brush (right / left-hand traffic) @ 15 \ mod_1548762120120_6.docx @ 256153 @ 2 @ 1 7.13Change the direction of rotation of the weed brush...
  • Page 58: Swing The Weed Brush Around The Transverse Axis

    Requirements for optimal weed removal on page given. Item: 81 / Instructions / 7 Operation / Kersten / Weedo II / 7.5 Swiveling the WKB around the longitudinal axis @ 14 \ mod_1548254206370_6.docx @ 253582 @ 2 @ 1 2019-03-01...
  • Page 59: Swing The Weed Brush Around The Longitudinal Axis

    Requirements for optimal weed removal on page given. Item: 82 / Instructions / 7 Operation / Kersten / Weedo II / 7.6 Setting the splash guard height @ 14 \ mod_1548253871306_6.docx @ 253560 @ 2 @ 1 2019-03-01...
  • Page 60: Setting The Height Of The Splash Guard

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    7.16Setting the height of the splash guard Fig.: Splash guard Splash guard frame with signal tape...
  • Page 61: Setting The Position Of The Splash Guard In The Plane

    Item: 83 / Instructions / 7 Operation / Kersten / Weedo II / 7.7 Setting the splash guard position on the level @ 15 \ mod_1548694554470_6.docx @ 256001 @ 2 @ 1   ...
  • Page 62 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Fig.: Setting the position of the splash guard on the plane Swivel arm Clamping lever The splash guard mounted on the swivel arm (1) can be rotated in the plane.
  • Page 63: 8Th Maintenance

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 86 / Instructions / 9 Maintenance / General / 9 Maintenance (heading only) @ 5 \ mod_1503059619814_6.docx @ 99148 @ 1 @ 1 8 maintenance   ...
  • Page 64: Maintenance Work

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 89 / Instructions / 9 Maintenance / General / 9.4 Maintenance work @ 3 \ mod_1478510223085_6.docx @ 55490 @ 2 @ 1 8.3 Maintenance work...
  • Page 65: Daily Check

    Clean the device after each use. Item: 94 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.4 Maintenance after 20 operating hours or longer downtimes @ 14 \ mod_1548254944690_6.docx @ 253715 @ 3 @ 1 8.3.3 Maintenance after 20 hours of operation / longer downtime   ...
  • Page 66: Maintenance After 20 Operating Hours / Long Downtimes

    Replace the engine air filter if it is very dirty or damaged. Item: 95 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.6 Maintenance after 100 operating hours @ 14 \ mod_1548254945543_6.docx @ 253737 @ 3 @ 1 8.3.4 Maintenance after 100 hours of operation / longer downtime...
  • Page 67: Maintenance After 100 Operating Hours / Long Downtimes

    Air filter after 100 bet at the latestclean rubbing hours. Clean after a few hours in very dusty conditions. Item: 96 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.7 Changing brush elements @ 14 \ mod_1548254811231_6.docx @ 253649 @ 3 @ 1 8.3.5 Changing brush elements   ...
  • Page 68: Changing Brush Elements

    (2) in the brush holder. The brush element (2) can then be removed and replaced. Item: 97 / Instructions / 9 Maintenance / Kersten / Weedo II / 9.4.8 Changing the brush plate @ 14 \ mod_1548254811747_6.docx @ 253671 @ 3 @ 1   ...
  • Page 69: Change The Brush Plate

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Fig.: Change the brush plate Hex bolt Brush plate The entire brush plate can be changed. To do this, first loosen the hexagon screw (1).
  • Page 70: Storage

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 99 / Instructions / 9 Maintenance / Kersten / UBS Hydro / 9.8 Storage of UBS Hydro and Weedo II @ 7 \ mod_1517577131696_6.docx @ 134575 @ 2 @ 1   ...
  • Page 71: Faults / Troubleshooting

    (See Chapter 3rd safety on page ) Pos: 104 / Anleitungen / 10 Trouble / Trouble shooting / Kersten / Weedo II / 10.3 / 10.4 Cause of trouble and its remedying Weedo II @ 15 \ mod_1548935068739_6.docx @ 256280 @ 22 @ 1   ...
  • Page 72 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. cable attachment. Place the spark plug connector firmly on the spark plug. Fuel line clogged or bad fuel Change the fuel filter or fill up with fresh fuel.
  • Page 73: 10Th Disassembly, Disposal

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 107 / Instructions / 11 Disassembly, disposal / General / 11 Disassembly, disposal (heading only) @ 5 \ mod_1503059876490_6.docx @ 99196 @ 1 @ 1 10 Disassembly, Disposal   ...
  • Page 74 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. ATTENTION Danger to the environment from lubricants Lubricants such as fats and oils contain toxic substances. They must not get into the environment.
  • Page 75: Technical Data Single-Axis Weed Brush Weedo

    Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 116 / Instructions / 12 Technical Data / Kersten / 12 Technical Data Weedo II @ 14 \ mod_1548254549745_6.docx @ 253625 @ 12222 @ 1 11 Technical data single-axis weed brush Weedo II    ...
  • Page 76: General Technical Data

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. 11.2 General technical data    unit Type Weedo II Weight 91 kg length 1650 mm width 550 mm...
  • Page 77: Key Engine Data Weedo Ii (Honda)

    Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    11.3 Key engine data Weedo II (Honda) engine Honda GCV 160 Petrol engine Net power Max. Torque...
  • Page 78 Single-axis weed brush Weedo II Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here.    11.4 Engine key figures Weedo II (Briggs & Stratton) engine Briggs & Stratton 750EX Series DOV...
  • Page 79 Error! Use the Home tab to apply Überschrift 1 to the text that you want to appear here. Item: 117 / Declarations / 1.02 MRL Declaration of Conformity Kersten II (German only) @ 7 \ mod_1521729651867_6.docx @ 156067 @ 2 @ 1   ...

Table of Contents