Maintenance - Tescom Nobby TIDF800J User Manual

Maintenance

Set the main switch to "0" and unplug the unit from the AC outlet before performing maintenance.
Main unit
Wipe away any dirt with a dry soft cloth.
To clean off difficult dirt, immerse a cloth in soapy water or neutral detergent diluted with water, wring it
dry, and wipe away the dirt.
Air intake/inlet cover
As shown in the figure, press the center of the inlet cover and remove the cover with your fingernail.
* Be careful not to get your finger caught in the inlet cover and damage the air intake mesh when
attaching and removing the cover.
(for opening)
Use a vacuum or a toothbrush to remove dust and hair from the air intake.
Wipe away any dirt from the inlet cover with a dry soft cloth.
After maintenance, install the inlet cover as shown in the figure.
* Do not use the dryer with the inlet cover removed.
Put the two convex parts into the
concave parts of the main unit.
Nail slit
Install the inlet cover onto the main unit
by pressing the lower part of the cover.
5