This symbol indicates that
this product must not be used
near water, such as baths or
basins with shower water.
Clean the air intake at least once a month.
Keep the air outlet at least 3 cm away from the hair. Do not apply hot air to the same place
for a long time.
Do not touch any attachment or the air outlet during or immediately after use, and also
avoid any accidental contact with your skin, as the attachments and the outlet will be hot.
The dryer is intended for the hair-drying and styling of human hair. Do not use it for
other purposes, such as for pet hair, wigs, or hairpieces.
Do not let the dryer fall or sustain impact. Do not use it if has been damaged.
Do not touch the dryer with hair dye-stained hands. Never apply alcohol, benzine, or
enamel remover.
The dryer is not intended for business use. Keep it away from unspecified usage by a
large number of people.
When opening or collapsing the grip, do not put your
finger on the shaded parts, and do not perform the
opening or collapsing action too quickly.
How to use
Always check the voltage and form of the AC outlet before use.
Check that the main switch is set to "0" and plug the dryer into the AC outlet.
*
The dryer will not work when it is plugged into the AC outlet with the switch not set to "0."
Select the type of ion by using the ion selection switch, set the main switch to "1" or "2," and apply
air to the hair.
The cool-shot switch can be used to switch between hot and cool air.
After use, set the main switch to "0" and unplug the dryer.
Do not use this appliance near bathtubs, showers, basins or other
vessels containing water.
When the appliance is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the appliance is switched off.
For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA is advisable in
the electrical circuit supplying the bathroom. Ask your installer for advice.
4
Need help?
Do you have a question about the Nobby TIDF800J and is the answer not in the manual?