Sony MHC-D90AV Operating Instructions Manual page 7

3
Connect the center speaker.
Connect the speaker cords to the
CENTER SURROUND SPEAKER jacks
of the same color.
Keep the speaker cords away from the
antennas to prevent noise.
Insert only the stripped portion.
Red* (') Black* ( ')
* The color of your speaker cords might be different.
See the speakers' manual for details if supplied.
4
Set VOLTAGE SELECTOR to
position of your local power line
voltage (except for North American,
Mexican, and Australian models).
VOLTAGE SELECTOR
110-120V 220-240V
5
Connect the AC power cord to a
wall outlet.
Demo mode appears in the display.
If the plug on this unit does not fit
your wall outlet, detach the supplied
adapter from the plug (except for
North and South American countries,
Australia and Malaysia).
6
Deactivate the demo mode by
pressing DISPLAY/DEMO when
the system power is turned off.
To attach the front speaker pads
Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the
speakers and prevent them from slipping.
To attach the center speaker pads
Tip
You can reinforce the bass sound by connecting an
optional super woofer to the super woofer
connector.
Note
You need to connect both left and right rear
speakers. Otherwise, the sound will not be heard.
continued
7