Electrolux EIP8146 User Manual page 17

Problem
An acoustic signal sounds
and the hob deactivates.
An acoustic signal sounds
when the hob is deactiva‐
ted.
The hob deactivates.
Residual heat indicator
does not come on.
Hob²Hood does not work.
Automatic Heat Up does
not operate.
The sensor fields become
hot.
There is no sound when
you touch the panel sensor
fields.
comes on.
The control bar blinks.
Possible cause
You put something on one
or more sensor fields.
You put something on the
sensor field .
The zone is not hot be‐
cause it operated only for a
short time or the sensor is
damaged.
You covered the control
panel.
You use a very tall pot
which blocks the signal.
The zone is hot.
The highest heat setting is
set.
The cookware is too large
or you put it too near to the
controls.
The sounds are deactiva‐
ted.
Child Safety Device or
Lock operates.
There is no cookware on
the zone or the zone is not
fully covered.
The cookware is unsuita‐
ble.
The diameter of the bottom
of the cookware is too
small for the zone.
ENGLISH
Remedy
Remove the object from
the sensor fields.
Remove the object from
the sensor field.
If the zone operated suffi‐
ciently long to be hot,
speak to an Authorised
Service Centre.
Remove the object from
the control panel.
Use a smaller pot, change
the cooking zone or oper‐
ate the hood manually.
Let the zone become suffi‐
ciently cool.
The highest heat setting
has the same power as the
function.
Put large cookware on the
rear zones, if possible.
Activate the sounds. Refer
to "Daily use".
Refer to "Daily use".
Put cookware on the zone
so that it fully covers the
cooking zone.
Use suitable cookware.
Refer to "Hints and tips".
Use cookware with correct
dimensions. Refer to
"Technical data".
17