Ayce LMA8050D Operator's Manual page 100

7. Mulching: If the grass box (4) is attached, remove it and replace it with the mulch
insert (15) as shown in Fig. 8-9.
8. Mowing with side discharge: Lift side discharge flat (19) and attach side discharge
cover (14) (Fig.10). If attached, remove grass collection basket and install mulch
insert (15).
Attention: The side discharge cover must not be installed when mulching.
9. Changing the cutting height (Fig. 11)
• Adjust cutting height adjustment (7) to change the cutting height.
Warning!
Do not change the cutting height until the motor has stopped and the safety plug has
been removed. Before starting to mow, check that the cutting tools are not blunt and
the fastening elements are not damaged. Replace blunt and/or damaged cutting tools
so no imbalance is created.
Before checking this, turn the motor off and remove the safety key.
Push the cutting height adjustment lever (7) outwards.
Select the required cutting height by moving the lever (7) right or left, then let the lever
(7) click into one of the slots. Ensure the lever (7) clicks into position.