Table of Contents
Advertisement
Using the EMS Foot Massager and Circulation Booster
1.
Please connect the power pack machine with the
magnetic clasp of the pad. When you hear two clicks,
the magnetic clasp is successfully connected.
2.
Fill the spray bottle with water and spray the conductive
silicone area on the foot pad evenly.
3.
Place your feet on the black conductive silicone area.
4.
Long press the middle button to turn on the device.
5.
Press the "+" or "-" button on the power pack machine or
the remote control to adjust the intensity. There are 15
levels of intensity in total.
6.
Short press the power button on the power pack
machine or the "M" button on the remote control to
switch modes.
Massage mode operation instructions
1.
Long press the power button to start the device. The
green indicator flashes once and beeps once.
2.
Press the "+" or "-" button to adjust the intensity.
There are 15 levels of intensity in total. When the
power is turned on, the device is set to the first level
of intensity by default. When the intensity is adjusted,
the green indicator light flashes once and beeps once.
When adjusting to the lowest or highest level, the
green indicator light flashes twice and beeps twice
continuously as a reminder.
3.
When the power is turned on, the program defaults
to mode A (training mode) level 1. The green indicator
flashes once and beeps once as a reminder. Press the
"M" key to cycle through the 4 modes (Training mode;
Caring mode; Knocking mode; Kneading mode). Each
time you change the mode, the intensity returns to the
Advertisement
Table of Contents
