KitchenAid 5KSB5553 Manual page 2

Disassemble
1
1. Remove Pitcher (or Culinary Jar) from Blender Base.
2. Place the Pitcher (or Culinary Jar) on a hard surface. Grasp the Pitcher (or Culinary Jar)
with your left hand and the Collar with your right hand. Pull the Pitcher (or Culinary Jar)
towards you while firmly grasping the Collar. This will unlock the Pitcher (or Culinary Jar)
from the Collar.
3. Lift the Pitcher (or Culinary Jar) straight up to separate it from the Collar. NOTE: There
is a removable seal between the Pitcher (or Culinary Jar) and Collar.
Assemble
1
1. Place Collar on a sturdy table or counter top and place removable seal
in the Collar, flat side down; press lightly into place. IMPORTANT: To avoid spills
or leaks, do not operate without seal in place.
2. Align the tabs on the Pitcher (or Culinary Jar) with the slots on the Collar.
3. Firmly grasp the Collar with your left hand and the Pitcher (or Culinary Jar)
with your right. Keep Pitcher (or Culinary Jar) on the counter top while pulling
the Pitcher (or Culinary Jar) towards yourself to lock the Pitcher (or Culinary Jar)
to the Collar. The Pitcher (or Culinary Jar) assembly is now ready to be installed
on the Blender Base.
See the instructional video at www.KitchenAid.com/Blender
2
2
2
3
3