Epson Perfection V500 Photo Service Manual page 34

EPSON Perfection V500 Photo
7. Move the A part on the Driven Pulley Holder Assy. in the direction of the arrow
and remove the CR Timing Belt from the Driven Pulley.
A part
CR Timing Belt Driven Pulley Holder Assy.
Figure 4-8. Removing the CR Timing Belt
8. Hold the Carriage Unit and release one end of the Carriage Shaft from the rear
bushing of the Lower Housing, then pull the other end out of the front bushing of
the Lower Housing.
9. Remove the Carriage Shaft from the Carriage Unit.
8-1
Rear
Bushing
Figure 4-9. Removing the Carriage Shaft
DISASSEMBLY / ASSEMBLY
Driven Pulley
Carriage Unit Carriage Shaft
Front
Bushig
8-2
10. Push up the B part of the Lock Plate attached on the rear of the Carriage Unit to
remove the Lock Plate from the Carriage Unit.
Disassembly Procedure
Lock Plate
B part
Figure 4-10. Removing the Carriage Unit
Revision A
34