Chapter Iv Installation - NUCLEONIX SYSTEMS GA720 Instruction Manual

Gamma area monitor
Table of Contents

Advertisement

CHAPTER - IV
INSTALLATION
This unit can be used as wall mounted unit or can be operated as a table top model. For wall mounting arrangement
the unit is provided with suitable clamps to be fixed on to wall and hooks have been provided on the unit for
hanging. The unit is provided with two handles for lifting and shifting purposes.
For installing the unit, Mains cord is to be fixed to the three pin circular connector on the unit side and the other
side through the three pin plug to 230V A.C. mains supply.
Now the unit can be switched ON for use. Alarms can be preset to the desired level.
The unit goes into dose rate acquisition mode on power on after performing hardware self check. The dose rate
in mR/hr is indicated both in the 6x7 segment display as well as in the 16x2 LCD display.
4

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GA720 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Related Products for NUCLEONIX SYSTEMS GA720

Table of Contents