Sony VGX-XL100 User Manual page 31

1 Connect both ends of the antenna's twin lead cable to the screw-type grips on
the combiner/transformer.
2 Connect the TV coaxial cable (optional) from the combiner/transformer to the
VHF/UHF port on the back panel of your computer.
If you are connecting to an indoor/outdoor antenna system, you may need to
re-orient the antenna for better reception.
1 Antenna system
2 TV coaxial cable (optional)
3 VHF/UHF RF combiner/
Transformer (optional)
4 VGX-XL100 computer
Connecting a Cable or Satellite Set-top Box
You can connect your computer to cable or satellite service that requires a
set-top box.
Option 1
1 Connect one end of a TV coaxial cable (optional) to your cable service
access. Connect the other end to the In jack on the back panel of your set-top
box.
2 Connect a second TV coaxial cable (optional) to the Out jack on your set-top
box. Connect the other end to the single-connection end of a splitter adapter
(optional).
VGX-XL100 Living Room Entertainment Computer
2
1
7
8
3
5
5 TV coaxial cable (optianal)
6 VHF/UVF port
7 Antenna system (air)
8 300-ohm Twin lead cable
(optional)
4
6
28