Sony VGX-XL201 User Manual page 106

7 Secure the drive to the drive holder with screws, through the holes on each side of the drive holder.
!
New hard disk drives may come with necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
8 Connect the power cables to the preinstalled and new hard disk drives.
9 Connect the SATA cables to the hard disk drives as follows:
Connect the internal SATA cables:
PORT0 cable
PORT1 cable
PORT2 cable
!
Use of a commercially available SATA cable with the straight-head connector may damage the connector on the hard disk drive by being pulled out
when you replace the drive holder. We recommend you use Sony SATA cables exclusively designed for your computer.
To the hard disk drives in:
Bottom drive bay
Middle drive bay
Top drive bay
n 106
Upgrading Your VAIO Computer
N