Thermarest FOOTPRINT Instructions

Protect the floor of your Tranquility™
tent by pitiching your tent on top of the
footprint. You can secure the tent to the
footprint by putting the tent pole ends
into the grommets.
You can also create a unique shelter
by combining the footprint with your
Tranquility tent poles and fly, utilizing
the included webbing and grommet
straps.
FOOTPRINT PACKAGE
INCLUDES:
Footprint, 4 Webbing/Grommet Straps
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
R E S T B E T T E R. P L AY B E T T E R.
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art #82-872 EN | Printed in Taiwan

FOOTPRINT, POLE AND FLY SET-UP INSTRUCTIONS

1. Lay out footprint, assemble poles.
Start with the larger 3 hubbed pole
with gold pole ends and put the pole
tips into the grommets with the gold
webbing. The Y hubs will be on either
side of the long general rectangular
shape of the footprint. Attach gold
buckle webbing to the grommets,
they go over the current grommets
against the base of the poles.
TRANQUILITY
FOOTPRINT
INSTRUCTIONS
Please follow these instructions to guide you through assembly only. For
complete instructions on the recommended care and use of your tent, watch
the videos at www.thermarest.com/tents.
™