Advertisement
Table of Contents
1. PREPARE FOR SET-UP
1. Lay out tent (floor facing down) with door open.
2. Assemble tent poles off to the side.
3. Place the large, 3-hubbed pole across the tent so
that the 3 hubs are aligned in the center of the tent.
PACKAGE INCLUDES:
Tent body, rainfly, 4 guy cords with tensioners, 10
stakes. Frame assembly: 1 3-hubbed pole assembly,
2 secondary poles.
WARNING:
KEEP ALL FLAMES AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the flammability requirements of CPAI-84. The fabric
may burn if left in continuous contact with any flame source.
R E S T B E T TE R. P L AY B E T T E R .
© 2017 Cascade Designs, Inc.
4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531
Limited Lifetime Warranty | Art # 82-527 EN | Printed in Taiwan
SET-UP INSTRUCTIONS
Please follow these instructions to guide you through assembly only.
For complete instructions on the recommended care and use of your tent,
watch the videos at www.thermarest.com/tents
Advertisement
Table of Contents
Related Manuals for Thermarest Tranquility 6
Summary of Contents for Thermarest Tranquility 6
- Page 1 4000 1st Ave. South | Seattle, WA | 98134 U.S.A. | 1-206-505-9500 | 1-800-531-9531 For complete instructions on the recommended care and use of your tent, Limited Lifetime Warranty | Art # 82-527 EN | Printed in Taiwan watch the videos at www.thermarest.com/tents...
- Page 2 2. ASSEMBLE TENT FRAME 1. Insert gold ends of the pole into grommets with gold webbing at the tent’s 4 corners. 2. Step through opened door onto tent floor. Locate center tent clip with gold webbing and attach to the tent pole’s top, center hub. 3.
Need help?
Do you have a question about the Tranquility 6 and is the answer not in the manual?
Questions and answers