Sony VGC-RT2SRY User Manual page 143

9 Remove the six screws from the drive holder and take out the hard disk drive.
10 Place a new hard disk drive into the drive holder and align the holes on each side of the holder.
11 Secure the drive to the drive holder with screws, through the holes on each side of the holder.
!
A new hard disk drive comes with the necessary screws. Do not overtighten these screws when securing the drive to the drive holder.
12 Slide the drive holder with the new drive into the hard disk bay until it clicks into place and connect the Serial ATA power
cable and the Serial ATA cable to the new drive.
13 Secure the drive holder with the screws that you removed in step 7.
14 Replace the hard disk bay cover.
n 143
Upgrading Your VAIO Computer
N