Sony VGC-RT2SRY User Manual page 71

To enable or disable the Auto Input Sensing feature
✍
The Auto Input Sensing feature is disabled by default.
1 Press the MENU button to display the OSD menu.
2 Press the Up (V) or Down (v) button to select OPTION and then the OK button.
3 Press the Up (V) or Down (v) button to select INPUT SENSING and then the OK button.
4 To enable the feature, press the Up (V) or Down (v) button to select AUTO ON and then the OK button.
To disable the feature, press either button to select AUTO OFF (Normal) or AUTO OFF (Power Save) and then the OK
button.
✍
Selecting AUTO OFF (Power Save) reduces power consumption. However, it requires more time than AUTO OFF (Normal) to resume power to your
computer when the connected HDMI device is off and your computer is off or in a power saving mode.
To change the default SONY logo lamp activity
!
You cannot change this option while the computer input is selected. To change the settings for the computer mode, see Changing the default SONY
logo lamp activity (page 127)
1 Press the MENU button to display the OSD menu.
2 Press the Up (V) or Down (v) button to select OPTION and then the OK button.
3 Press the Up (V) or Down (v) button to select LOGO LAMP and then the OK button.
4 Press the Up (V) or Down (v) button to select ON or OFF and then the OK button.
for the procedure.
n 71 N
Using Your VAIO Computer