Table of Contents
Advertisement
User Guide
Before using the Remote Commander
Before using the remote commander, you need to insert the supplied AA batteries and connect the remote sensor to enable
communication between the computer and the remote commander.
To insert batteries
1
Turn the remote commander over.
2
Press in the tab (1) and lift the battery cover up.
3
Insert the two AA batteries into the remote commander.
4
Align the battery cover to the remote commander.
5
Press down until the cover clicks into place.
✍
If the remote commander does not operate properly, you may need to replace the batteries. When the remote commander is not being used for extended periods of time,
batteries to avoid possible damage from battery leakage.
n N
20
Using your VAIO computer
Advertisement
Table of Contents
