Checking The Driver's Installation - Sony VGC-RA304 User Manual

User Guide

Checking the driver's installation

When the computer restarts, check that the device is working properly.
To check the driver's installation, proceed as follows:
1 From the Start menu, click Control Panel.
The Control Panel window appears.
2
Click the System icon.
The System dialog box appears.
If you do not see the System icon, click Switch to Classic View on the left side.
3
Click the Hardware tab, then click Device Manager.
4 Double-click the option corresponding to the device you installed, then double-click your device.
The Properties dialog box appears.
5
Make sure that the This device is working properly message is displayed under Device status.
6 Click OK.
Close all the opened windows, your device is ready for use.
The device is not working properly in the following cases:
Your device is shown in Device Manager with a yellow question or exclamation mark.
Right-click your device and click Uninstall. Then repeat from step 2 in Installing a driver
Double-clicking the category of your device in the device manager list does not display your device.
You have to remove your device. Please refer to Uninstalling a driver
Installing a driver (page
Double-clicking Other devices displays your device.
You have to right-click your device, then click Uninstall. Repeat from step 2 in Installing a driver
If the This device is working properly message is not displayed, the device is not working properly.
Click OK to close the Properties dialog box, then reinstall the driver as follows:
79).
(page
(page 84) to remove it. Then repeat from step 2 in
n N
81
Managing drivers
79).
(page 79).