Table of Contents
Advertisement
Safety
3.2.2 Work and danger area
•
The user is responsible to third parties in the work area!
•
Staying in the danger area of the machine is prohibited!
•
Check the near area before switching on the implement and starting.
•
Pay special attention to children and animals. Ensure sufficient visibility!
•
Before starting work, remove foreign objects from the surface to be worked. Pay attention to other
foreign objects during work and eliminate them in good time.
•
When working in enclosed areas, the safety distance to the border must be maintained so as not to
damage the machine or sweeping roller.
•
When working in the immediate vicinity of public roads and paths, they should not be approached
across, as far as possible longitudinally, as this minimizes the risk of injury to third parties due to flying
objects.
•
When working on public roads and squares or in the immediate vicinity, warning and danger signs
should be set up in order to attract the attention of third parties.
3.2.3 Before starting work
•
Before starting work, familiarize yourself with all the equipment and actuators and their function,
and make sure that all safety devices are properly installed and in the protective position. It is too
late during the work assignment!
3.2.4 During operation
•
Never leave the operating area while driving!
•
Do not leave the operating station until the sweeping roller of the attachment comes to a standstill!
•
Do not make any adjustments to the attachment during operation - risk of accident!
•
The transport of persons and objects is prohibited!
•
If, for example, the attachment has caught a foreign object and blocked it, stop the engine and clean
the attachment with a suitable tool!
•
When intervening or cleaning the attachment, always switch off the engine! Please observe the safety
instructions of the self-propelled implement.
•
In the event of damage to the self-propelled implement or attachment, stop the engine immediately
and have the damage repaired.
3.2.5 Leaving the machine
•
By using wheel chocks or, if necessary, the parking brake, secure the machine from rolling away
when leaving the vehicle.
•
Secure the device against unauthorized use!
•
Never leave the appliance unattended while it is still in operation!
3.2.6 Screw connections and tires
•
When working on the wheels, make sure that the device is safely parked and secured against
rolling away!
•
Regularly check nuts and bolts for tightness and retighten if necessary.
•
Repair work on the tires must only be carried out by qualified personnel and with suitable
mounting tools!
•
If the tire pressure is too high there is a risk of explosion!
•
Check the air pressure regularly.
6
Advertisement
Table of Contents
