Upgrading your VAIO computer
7
Press evenly against the memory module's upper corners. The end latches snap into position
automatically, as shown (3):
8
Reinstall any add-on cards or components you removed.
9
Replace the side cover as described in Closing the side cover
✍
There is only one correct way to insert the memory module. Make sure the rivet of the module is lined up with the connector.
!
Use only PC 2700 DDR 333 SDRAM or PC2100 DDR266 SDRAM DIMM modules, depending on your model.
(page
86).
n N
85